Shipping Ones Pinball Machine.

One of many responsibilities involved with purchasing a new pinball machine is knowing the manner in which you will soon be transporting it without damaging it. If you’re planning to be ponying up a significant wad of cash to obtain a pinball machine, it’s a good idea to learn how to move it from point A to point B and still keep it in the exact same condition it was when it started its journey.

Firstly, and possibly most obviously, you’re planning to desire a vehicle that’s big enough to hold it. It might be a van, truck, Arcade games for sale or trailer but it’s planning to need space to hold a model that, when folded down will measure 76cm wide, 76cm tall and 140cm deep.

Never attempt to transport a pinball machine in its fully assembled configuration – like that lies heartbreak all round.

Before attempting to put the pinball machine in your automobile, you first need certainly to fold down the headboard. All of the now manufactured pinball machines and by that I’m talking about those that were created from around 1980 onwards, are created with hinges allowing the headboard to be folded. Otherwise, your pinball machine will have a headboard that is bolted into place.

To get at the bolts on an older pinball machine you must eliminate the backing panel. When you undo the bolts you’ll also have to unplug the connectors that rundown into the box. If you’re concerned about remembering where these connectors go, it could be a good idea to label them.

After the headboard has been folded on the surface of the machine, you must eliminate the pinball machine legs. While removing the legs, ensure you pay attention to the front legs and back legs in order to avoid confusion when reattaching them when you have reached your destination. With some makes of pinball machine, the legs would be the same length front and back making it difficult to inform them apart. Others, such as for instance Sega pinball machines, the legs are longer at the rear compared to the front – easier to inform which goes where.

Ensure you have removed the balls from the device, that you don’t want them bouncing around everywhere in transit. Also, ensure the coin return door has been secured if you had opened it while undoing the legs.

Loading the pinball machine in to a vehicle is really a two-person job. Simply load one end (front first usually works best) onto the tray and then slide it in. Because you’ve folded the headboard down it will in all probability be lying through to the front end of the table. Loading the pinball machine front first will put the heavy end closest to the vehicle’s cabin and will prevent nearly all potential movement. Ensure the device is securely tied down with straps and you’re in your way.

When you’ve attained your destination, it is usually a good idea to slide the device halfway out of your vehicle, attaching the legs to one end before sliding it out the remaining portion of the way and attaching the other legs. After the pinball machine is in position, reassemble the headboard and you’re ready to savor your new pinball machine.

Leave a Reply

Your email address will not be published. Required fields are marked *